Yamaha RX-V2400 - Manual (Page 61)

57
English
SET MENU
A
D
V
ANCED
OPERA
T
ION
■ Parameter initialization PARAM. INI
Use this feature to initialize the parameters for each sound
field program within a sound field program group. When
you initialize a sound field program group, all of the
parameter values within that group revert to their initial
settings.
MANUAL SETUP > OPTION MENU >
PARAM. INI >
Press the corresponding numeric button for the sound
field
program that you want to initialize.
An asterisk (*) next to a program number means that the
parameter values have been changed from their initial
settings.
• You cannot automatically revert to the previous parameter
settings once you initialize a sound field program group.
• You cannot separately initialize individual sound field
programs.
• You cannot initialize any program groups when MEMORY
GUARD is set to ON.
■ Speaker impedance setting SP IMP.SET
Use to select the impedance of your speakers.
MANUAL SETUP > OPTION MENU >
SP IMP.SET >
Choices: 6ohms, 8ohms
■ Zone set ZONE SET
Use to specify the location of speakers connected the
SPEAKERS B terminals.
MANUAL SETUP > OPTION MENU >
ZONE SET >
SP B
Use this feature to select the location of the front speakers
connected to the SPEAKERS B terminals.
Choices:
FRONT , ZONE B
• Select FRONT to turn on/off SPEAKERS A and B
when the speakers connected to the SPEAKERS B
terminals are set in the main room.
• Select ZONE B if the speakers connected to the
SPEAKERS B terminals are set in another room. If
SPEAKERS A is turned OFF and SPEAKERS B is
turned ON, all the speakers including the subwoofer in
the main room are muted and the unit outputs sound
from SPEAKERS B only.
• If you connect headphones to the PHONES jack on the unit, the
sound is output from both headphones and SPEAKERS B.
• When a DSP program is selected, the unit automatically enters
the Virtual Cinema DSP mode.
■ Zone 2 set ZONE2 SET
(U.S.A., Canada and Australia models only)
MANUAL SETUP > OPTION MENU >
ZONE2 SET >
Output volume OUTPUT VOL
Use to select how the volume control will operate with
regard to the ZONE 2 OUTPUT jacks.
Choices:
VAR. , FIX
• Select VAR. to adjust the ZONE 2 OUTPUT volume
simultaneously with VOL +/– on the remote control.
• Select FIX to fix the ZONE 2 OUTPUT volume level
to a standard line level.
Zone 2 amplifier ZONE2 AMP
Use to select how the ZONE 2 speakers will be amplified.
Choices: ON,
OFF .
• Select OFF if you do not use Zone 2 speakers or if you
connect your Zone 2 speakers through an external
amplifiers connected to this unit’s ZONE 2 OUTPUT
jacks.
• Select ON to use this unit’s internal amplifier if you
connect your Zone 2 speakers directly to this unit’s
PRESENCE/ZONE 2 speaker terminals.
Notes
1 2 3 *4
*5 6 7 8
9 *10 11
C)PARAM. INI
/ : Exit
p
p
-/+ : Select
Minimum 8ohms
D)SP IMP.SET
/ : Exit
p
p
-/+ : Select
SP_B;;;;;;FRONT
E)ZONE SET
Notes
/ : Up/Down
p
p
-/+ : Select
OUTPUT VOL;;VAR.
ZONE2 AMP;;;NONE
F)ZONE2 SET
00_RX-V2400U_EN.book Page 57 Friday, October 10, 2003 10:54 AM