Yamaha CD-R/RW Drive CRW6416SX - Manual (Page 19)

12
Setting Up The CRW6416SX Drive
There are three stages to setting up your CRW6416SX drive.
● Installing a SCSI adapter card
You will need to open the casing of your computer and insert a SCSI adapter
card (sold separately) if one has not been installed already.
n You will need a Phillips screwdriver to open the casing of the computer and to secure the SCSI
adapter card in its slot.
● Connecting the drive
You will need to connect your CRW6416SX drive to your computer’s SCSI
adapter card using a SCSI cable. You will also need to connect the included
power cable between the drive and an electrical outlet.
● Verifying the Hardware Installation
Before you can begin using your CRW6416SX drive, you need to verify that it
has been installed and recognized correctly.
CRWSX_e.qx 7/8/99 3:08 PM Page 19