Zanussi ZBM 890 - Manual (Page 7)

8
How to select a Cooking
Function and Temperature
The oven is provided with 10 different cooking
functions. For each of them, a pre-set temperature
will be automatically selected.
1) Switch on the oven by pressing the "ON"
button. The Thermoflow function will be
automatically selected, and a pre-set tempe-
rature of 170
°
C will be shown on the
programmer display.
2) Press the Oven Function Control button until
the required function is shown on the display.
3) If the pre-set temperature is not suitable,
select the required temperature using the
"Increase" or "Decrease" buttons.
After a few seconds, the temperature display will
show the current temperature of the oven cavity.
Cooking Function Symbols
Thermoflow - fan cooking - allowing
you to roast or roast and bake
simoultaneously using any shelf, without
flavour transference.
Conventional cooking - The heat comes
from both the top and bottom element,
ensuring even heating inside the oven.
Grill - The full grill element will be on.
Inner grill element only - useful for
grilling small quantities.
Thermal Grilling - The grill element and
the oven fan operate together, circulating
hot air around the food.
Pizza Oven - Recommended for pizzas,
quiches or pies.
Top heating element - The heat comes
from the top of the oven only.
Bottom heating element - The heat
comes from the bottom of the oven only.
Bread Proving - To shorten the proving
time of bread, pizza dough, etc.
Defrost Setting - This setting is intended
to assist in thawing of frozen food.
☞
CHILD
SAFETY OFF ON
PROBE
TEMP.
COOK
TIME
STOP
TIME
MINUTE
MINDER