ZyXEL Communications WLAN 802.11n USB Adapter NWD271N - Manual (Page 5)

5
ENGLISH
3 Connect with WPS
To connect wirelessly to an Access Point (AP) with the
NWD271N, use the WPS button.
1 Place a WPS-enabled AP within range of the NWD271N.
2 Press the WPS button on both devices for between one
and three seconds. It doesn’t matter which button is
pressed first. You must press the second button within two
minutes of pressing the first one.
The LED flashes steadily once they are connected.
4 Connect to a Wireless Network
1 Double-click the icon. The ZyXEL utility Link Info
screen displays. Click the Site Survey tab.
2 The available wireless
networks display in the
Available Network List.
SSID means Service
Set Identifier and is the
name of the wireless
network.