York SMS Bridge - Manual (Page 8)

User Manual
Configuration YORK Marine, Controls
Revision 1.3 · Updated: 070507 Author: Marc Anderson · Owner: RS
Project : SMS Bridge Page 8 of 15
File: e:\york\sms bridge\manual\smsbridge-manual_13.doc
Configuration,
Continued
Mail handler configuration (continued)
Step Action
5 From name: Enter a name to identify the sender as the SMS Bridge
system. The receiver sees this name in the inbox.
6 Administrator e-mail: Enter the address for person monitoring the
system.
7 Click Save configuration to save the changes.
8 Click the Test button to send a test message from the SMS Bridge to the
administrator.
9 Close the configuration screen and start the service.
SMS bridge
configuration The SMS Bridge is pre-configured with the settings that are required for most
applications. If the service does not start, verify the settings as described below.
Step Action
1 Click SMSBridge in the main screen.
2 Click the Config button. The configuration screen opens.
3 Log interface host: This is the host name for the GMS log interface.
The setting to use is logif.reefers-online.com.
In rare cases it may be necessary to enter the IP address for the
interface. The IP address is currently 195.249.110.24 but is subject to
change.
4 Log interface port: The value for this setting is 10000.
5 Close the window and start the service. The service is functioning
correctly if STARTED appears in the Status field.
Continued on next page