ZyXEL Communications P-2024 - Manual (Page 6)

P-2024 Quick Start Guide
5
The LAN and WAN LEDs turn on when they are connected, and blink when there is traffic.
A green LED indicates that the connection is at 10Mbps, and a yellow LED indicates that
the connection is at 100Mbps.
V
If the PWR/STATUS LED does not turn on, check the P-2024’s power
connection. If the LAN or WAN LED does not turn on, ensure that the
device to which it is connected is working correctly.
2.1 Using the Telco-50 Cable
You need to use a Telco-50 cable with exactly the following pin assignments.