Zhone Technologies Copper-Based Ethernet - Manual (Page 4)

Product Category
EtherXtend LT-DS3
EtherXtend LT DS3 is a value featured EAD supporting up to
90 Mbps with bonded DS3. It supports SNMP, CLI or web-based
management and Layer 2 bridging. It supports 802.1Q and
802.1p, along with DHCP.
EtherXtend LT uses proven HDLC-based encoding for Ethernet
loop bonding, supported on both MALC and IPD product lines.
1 or 2 DS3 WAN ports and
4 Ethernet LAN ports T1 / E1 / SHDSL Network Extenders
with proven performance
TNE / ENE / SNE
Zhone’s line of Network Extenders have been serving carrier’s
needs for years, delivering highly reliable and proven Ethernet
over copper services and loop bonding. A large selection of
models offers a selection of WAN and LAN options to suit a
particular service need. They can be used bookended or integrated
with MALC or IPD Ethernet aggregation compatible line cards.
All Network Extenders use time tested HDLC-based Ethernet
loop bonding.
1 or 2 SHDSL.bis 5.7 Mbps WAN ports
and up to 2 Ethernet LAN ports
EtherXtend LT
EtherXtend LT is a value featured EAD that offers the advantages
of 5.7 Mbps SHDSL.bis in 1 or 2 port WANS and up to 1 or 2
Ethernet LAN ports. EtherXtend LT uses proven HDLC-based
encoding for Ethernet loop bonding, supported on both MALC
and IPD product lines. Features configuration-free, plug-and-play
operation.
4 or 8 SHDSL.bis 5.7 Mbps WAN
ports and 4 Ethernet LAN ports
EtherXtend
EtherXtend is a high capacity EAD capable of bonding up to
8 SHDSL.bis copper lines for up to 45.6 Mbps of bandwidth.
EtherXtend supports both 802.3ah EFM interface and OAM
standards, as well as existing HDLC-based Ethernet over copper
bonding. It is an intelligent Demarc device, being fully managed
with bridging or Layer 3 routing options supported.
• • •
Ethernet Access Devices (EADs)
Easy, Proven, Deployed
World’s most proven line of EADs