Zenith Z42PX21D - Manual (Page 15)

Owner’s Manual 15 206-4022
Installation
• Component Input ports
To get better picture quality, connect a DVD player to the compo-
nent input ports as shown below.
How to connect
Connect the audio and video cables from the external equip-
ment's output jacks to the TV input jacks, as shown in the
figure.
When connecting the TV to external equipment, match the
jack colors (Video = yellow, Audio Left = white, and Audio
Right = red).
How to use
1. Select the input source with using the TV/VIDEO button on
the remote control. Note that this TV finds the connected
input sources automatically for Video, Front Video and
Component 1-2. It is presumed that RGB and HDMI/DVI
sources are connected.
2. Operate the corresponding external equipment.
Component ports
on the TV
Y P
B
P
R
Video output ports
on DVD player
Y
Y
Y
Y Pb
B-Y
Cb
P B
Pr
R-Y
Cr
P R
How to connect
1. Connect the DVD video outputs (Y, P B , P R ) to the COMPONENT (Y, P B , P R ) INPUT jacks on the TV and connect the DVD
audio outputs to the AUDIO INPUT jacks on the TV, as shown in the figure.
2. If your DVD only has an S-Video output jack, connect this to the S-VIDEO input on the TV and connect the DVD audio outputs
to the AUDIO INPUT jacks on the TV, as shown in the figure.
Note: If your DVD player does not have component video output, use S-Video.
How to use
1. Turn on the DVD player, insert a DVD.
2. Use the TV/VIDEO button on the remote control to select Component 1 or Component 2. (If connected to S-VIDEO, select
the Video or Front Video external input source.)
3. Refer to the DVD player's manual for operating instructions.
External External A/V Source Setup A/V Source Setup
DVD Setup DVD Setup
RS-232C INPUT
(CONTROL/SERVICE)
AUDIO
R L
DIGITAL AUDIO (OPTICAL)
DVI
INPUT
COMPONENT2
INPUT
OUTPUT
RGB INPUT
VIDEO
HDMI 2
HDMI /DVI
COMPONENT INPUT 1
R L
(MONO)
V
I
D
E
O
S R
E
M
O
T
E C
O
N
T
R
O
L
CABLE ANTENNA
AC INPUT
DVD
/DTV
INPUT
COMPONENT INPUT 2 MONITOR OUTPUT
A/V INPUT
VIDEO AUDIO
R L AUDIO VIDEO
AUDIO
INPUT
RS-232C INPUT
(CONTROL/SERVICE)
AUDIO
R L
DIGITAL AUDIO (OPTICAL)
DVI
INPUT
COMPONENT2
INPUT
OUTPUT
AUDIO
INPUT RGB INPUT
VIDEO
HDMI /DVI
COMPONENT INPUT 1
R L
(MONO)
CABLE ANTENNA AC INPUT
DVD
/DTV
INPUT
COMPONENT INPUT 2 MONITOR OUTPUT
A/V INPUT
VIDEO AUDIO
Cable
S-VIDEO
REMOTE
CONTROL
B R (R) AUDIO (L) DIGITAL AUDIO
OPTICAL
(R) AUDIO (L) S-VIDEO
DVD
or
Camcorder
Video Game
Device
Notes:
• Digital Audio will not work for Component 1 input source.
• Digital Audio operation has priority if Digital Audio and AUDIO L/R
are connected at the same time.
or