Z-Com R2 Extender - Manual (Page 18)

in “Wireless”. Select RF1 and hit “Align Antenna” button, an antenna alignment tool will
popup. Specify the Target RSSI and click “Start” to begin the antenna alignment.
Fix the local antenna and adjust the remote antenna elevation and horizontal direction.
During the adjustment, observe “Current RSSI” in local R2 Extender. Fix the remote
antenna when it reaches your expectation. Usually, RSSI between -60 and -70dBm
indicates rather good signal strength.
Adjust the local antenna after fixing the remote one. During the adjustment, observe
“Current RSSI” in the remote R2 Extender. Fix the local antenna when it reaches your
expectation.
Congratulations! You have primarily completed configuration on R2 Extender and they can be
put into operation. For more advanced configurations, please refer to the User manual.
Chapter 5 Troubleshooting Page 18