Mounting the inverter on the bracket – Xantrex Technology GT5.0-NA User Manual
Page 26
Installation
2–8
975-0320-01-01
Mounting the Inverter on the Bracket
Place the inverter’s mounting hooks over the flanges on the bracket. Ensure the
inverter is seated properly, then secure the bottom of the inverter with appropriate
screws or anchors through the mounting slots.
Figure 2-3 Placing the Inverter on the Mounting Bracket
Flange with
mounting slots
110 cm (43")
100 cm (39")
Ground/floor
Ground clearance
required for outdoor
installation