Set up your computer’s ip address – ZyXEL Communications P-660RU-T V2 User Manual
Page 21
P-660RU-T v2 Quick Start Guide
20
A) Check the lights on the front panel. If they are different
from what is described in section
, make sure the
connections are correct. If the lights are still different,
turn off the device, wait a few seconds, and turn it on
again.
B) Follow the steps in section
the correct information. For example, if your account
has a user name and password, make sure you type it
correctly. In addition, if you are not sure which
encapsulation your ISP uses, contact your ISP.
C) If you are using a new Internet account, contact your
ISP to make sure it is active.
D) If you still have problems, see Troubleshooting in the
User’s Guide.
Set Up Your Computer’s IP Address
This section shows you how to set your Windows NT/2000/XP
computer to automatically get an IP address. This ensures
that your computer can connect with your P-660RU-T v2.
Refer to your User’s Guide for detailed IP address
configuration for other Windows and Macintosh computer
operating systems.
1 Click start (Start in Windows 2000/NT) > Settings >
Control Panel.