Xerox OS/2 WARP 4.0 - Manual (Page 3)

Page 3
OS/2 Warp 4.0 (NetBEUI) Peer-to-Peer Network Quick Install Card
Xerox Document Centre 240/255/265 LP/ST
r)
Double-click on the Connections
Icon.
s)
Double-Click on Printers.
t)
Close the Connections Window.
u)
Double Click on Printer in the Printers
window. DO NOT CHOOSE THE
NETWORK PRINTER OPTION.
v)
Enter a name for the local queue in the
Printer window. (Overwrite the printer
that already appears with something
unique - this does not have to be the
share or hostname of the printer).
w)
Make sure the cursor is still in the
printer window and press the
Enter
key on the keyboard.
x)
Select familiar w/ OS/2 if prompted.
y)
Highlight the correct lpt port (assigned
in step
2m).
3.
Install a new printer driver.
a)
Insert CentreWare CD 2 into your CD-
ROM drive.
b)
Make a /desktop/drivers directory from
an OS/2 Window.
c)
Copy the driver files from the CD-ROM
disk to the /desktop/drivers directory.
d)
Click the Install new printer driver...
button.
e)
Select Other OS/2 printer driver.
f)
Enter the correct directory in the
appropriate field.
g)
Click the Refresh button.
h)
Click the Install button after you see
the driver description appear.
i)
Click the OK button to confirm that the
driver has been installed.
4.
Highlight the OS/2 driver in the Default
printer driver window and click the
Create button.
5.
Close the Printers window.
6.
You are now ready to print to the local
queue created in step
2v.
7.
Print a test job.
8.
Check your test job for quality and use the
problem solving section of the
Document
Centre 240/255/265 Reference Guide for
resolving print defects.
9.
If your print job does not print, refer to the
troubleshooting section in the document
entitled
Network Installation and
Troubleshooting Guide to correct the
problem.