Yamaha mLAN MY16 - Manual (Page 2)

2
English
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death
from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but
are not limited to, the following:
• Before installing the MY16-mLAN in an audio device please check to make sure that the device is
compatible with the MY16-mLAN, and check possible restrictions regarding the maximum number of
Yamaha and third-party expansion cards that can be simultaneously installed. Refer to the operation manual
supplied with the audio device, and/or the Yamaha Pro Audio web site at: http://www.yamahaproaudio.com/
• Do not install the MY16-mLAN card in any Yamaha products not specified by Yamaha for use with the
MY16-mLAN to avoid possible electrical shock, fire, or equipment damage.
• Do not attempt to disassemble or modify the card. Do not apply excessive force to card connectors or other
card components. Mishandling of the card may lead to shock, fire hazard, or equipment failure.
• Be sure to disconnect the power cable of the main unit before installing this card (in order to eliminate
shock hazard).
• Turn off all peripheral devices of the host device before installation and unplug all cables connecting the
host device to all peripheral devices.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or
others, or damage to the device or other property. These precautions include, but are not limited to, the
following:
• Do not touch the metallic leads (pins) of the circuit board when handling the card. The pins are sharp and
may cause hand cuts.
• Wear a pair of heavy gloves during installation to avoid scratching or cutting your hands on sharp edges.
• Avoid touching exposed connectors and metal parts to minimize the possibility of bad connections.
• Drain all static electricity from your clothing and body before handling the card. Static electricity can
damage the card. Touch an exposed metal part of the host device or other grounded object beforehand.
• Do not drop the card or subjecting it to shock, which can cause breakage and/or malfunction.
• Do not drop screws or other small parts inside the card. If power is applied while screws or similar metal
objects are loose inside the unit the card may malfunction or be damaged. If you cannot retrieve dropped
objects yourself, refer the problem to qualified Yamaha service personnel.
Yamaha cannot be held responsible for damage caused by improper use or modifications to the device, or
data that is lost or destroyed.