Zanussi ZKT 651 D - Manual (Page 6)

6
Touch Control sensor fields
The appliance is operated using Touch Control sen-
sor fields. Functions are controlled by touching sen-
sor fields and confirmed by displays and acoustic
signals.
Touch the sensor fields from above, without covering
other sensor fields.
Displays
Residual heat indicator
1
Warning! Risk of burns from residual heat. Af-
ter being switched off, the cooking zones need
some time to cool down. Look at the residual
heat indicator
h
.
3
Residual heat can be used for melting and
keeping food warm.
The induction cooking zones create the heat re-
quired for cooking directly in the base of the cook-
ware. The glass ceramic is merely heated by the
residual heat of the cookware.
The cooling fan switches itself on and off depending
upon the temperature of the electronics.
Sensor field Function
On / Off Switches appliance on and off
Increase settings Increasing heat setting/time
Decrease settings Decreasing heat setting/time
Timer Timer selection
Lock Locking/unlocking the control panel
Power Switching the power function on and off
Display Description
¾
Cooking zone is switched off
u
Keep warm setting Keep warm setting is set
¿
-
Ç
Heat settings Heat setting is set
a
Automatic warm up function Automatic warm-up function is activated
e
Fault Malfunction has occurred
f
Pan detection Cookware is unsuitable or too small or no cookware
has been placed on the cooking zone
h
Residual heat Cooking zone is still hot
l
Child safety device Lock/child safety device is set.
p
Power Power function is switched on
_
Safety cut-out Safety cut-out has been activated