Zephyr Duo Is. ADL-M90ASX - Manual (Page 21)

Installa
tion - P
o
w
er Supply C
onnec
tion
- Connect the electrical conduit to the Field
Wiring Compartment using listed onduit
fi ttings.
- Carry out the power supplly connection in
accordance with the national electric code,
ANSI/NFPA 70-1999.
5. Replace the lid by following the instructions from step 3 in reverse order, ensu-
ring that the tab on the lid is within the enclosure.
6. Remove adhesive tape and lower the bottom duct cover so it rests on top of
the hood body.
- 21 -