Yamaha RX-V740 U - Manual (Page 59)

55
English
ADDITIONAL
INFORMA
TION
4 Press u / d to select the
parameter.
5 Press j / i to change the
parameter value.
y
• When you set the parameter to a value other than the factory-
set value, an asterisk mark (*) appears by the parameter name
on the video monitor. To reset to the factory-set value, press j
/ i repeatedly until the asterisk mark disappears.
6 Repeat steps 3 to 5 above as necessary to
change other program parameters.
Notes
• For some of the programs, the available parameters may be
displayed on more than one OSD page. To scroll through
pages, press u / d.
• You cannot change parameter values when “OPTION 2 MEM.
GUARD” on the set menu is set to ON.
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is set in standby mode,
the power cord is disconnected from the AC outlet, or
the power supply is temporarily cut due to power
failure. However, if the power is cut for more than one
week, the parameter value you edited will return to the
factory setting. If this happens, edit the parameter
value again.
Changing parameter settings
You can enjoy high quality sound with the factory-set
parameters. Although you do not have to change the
initial settings, you can change some of the parameters to
better suit the input source or your listening room.
Use the remote control to make adjustments.
y
• It is advisable to use on-screen display when changing the
settings.
1 Press AMP to set the
remote control in AMP
mode.
2 Turn on the video monitor
and press ON SCREEN
repeatedly to select the
full display mode.
3 Select a DSP program you want to adjust.
AMP
TV VOL
PRESET PRESET
TV MUTE
TV VOL
SELECT
CH CH
+
+ –
–
TV VOL
PRESET PRESET
TV MUTE
TV VOL
SELECT
CH CH
+
+ –
–
P03 ROCK CONCERT
≥
INIT.DLY…………15ms
DSP LEVEL…………0dB
ROOM SIZE…………1.0
LIVENESS…………………5
REV.TIME…………1.6s
REV.DELAY……120ms
ON SCREEN
DISPLAY
Program No.
The parameter setting display
Parameters
Cursor
Program name
Parameter values
SOUND FIELD PROGRAM PARAMETER EDITING
DISC SKIP
POWER
TV
AMP
REC
AUDIO
VOL
TV INPUT
SET MENU
A/B/C/D/E
LEVEL
TITLE TV VOL
TV VOL
TV MUTE
SELECT
MENU
MUTE
CH
TEST ON SCREEN STEREO
EFFECT
DISPLAY RETURN
CH
PRESET PRESET
HALL JAZZ CLUB ROCK CONCERT ENTER- TAINMENT
MUSIC VIDEO TV THEATER MOVIE THEATER 1 MOVIE THEATER 2
/DTS SUR.
1 2 3 4
5 6 7 8
9 10 11 12
NIGHT 6.1/5.1
0 CHP/INDEX +10
POWER
AV
2
5
4
1
3
HALL JAZZ CLUB
ROCK
CONCERT
ENTER-
TAINMENT
MUSIC
VIDEO
TV
THEATER
MOVIE
THEATER 1
MOVIE
THEATER 2
/DTS
SUR.
1 2 3 4
5 6 7 8
9 10 11 12
NIGHT 6.1/5.1
0 CHP/INDEX +10
0110RX-V740_54-59_EN-U.p65 03.1.10, 6:36 PM 55