Yamaha RX-V740 U - Manual (Page 47)

43
English
AD
V
ANCED
OPERA
TION
SOUND 5 CENTER GEQ (center
graphic equalizer)
Use this feature to adjust the built-in 5-band graphic
equalizer so that the center speaker tonal quality matches
that of the left and right main speakers. You can select the
100 Hz, 300 Hz, 1 kHz, 3 kHz, or 10 kHz frequencies.
Control range (dB): –6 to +6
Initial setting: 0 dB for 5-band
1 Press d to select a higher frequency and u
to select a lower frequency.
2 Press j / i to adjust the level of that
frequency.
Note
• You can monitor the center speaker sound while adjusting this
parameter by using the test tone. Press TEST before starting
the foregoing procedure. Once you begin this procedure, the
test tone remains at the center speaker and you can hear how
the sound changes as you adjust the various frequency levels.
To stop the test tone, press TEST.
SOUND 6 HP TONE CTRL
(headphone tone control)
Use this feature to adjust the level of the bass and treble
when you are using headphones.
Control range (dB):
BASS .................... –6 to +3
TRBL (treble) ....... –6 to +3
Initial setting:
BASS .................... 0 dB
TRBL .................... 0 dB
INPUT 1 I/O ASSIGN (input/
output assignment)
You can assign jacks according to the component to be
used if this unit’s COMPONENT VIDEO input jack or
DIGITAL INPUT/OUTPUT jack settings (component
names for jacks) differ from those of the component. This
lets you to change the jack assignment and effectively
connect more components.
Once assigned, select that component with INPUT (or the
input selector buttons on the remote control).
■ 1A for COMPONENT VIDEO INPUT jacks
Choices: [A] DVD, VCR 2/DVR, VCR 1, V-AUX,
D-TV/CBL
[B] DVD, V-AUX, VCR 2/DVR, VCR 1,
V-AUX, D-TV/CBL
■ 1B for OPTICAL OUTPUT jack
Choices: (1) MD/CD-R, CD, PHONO, VCR 2/
DVR, VCR 1, V-AUX, D-TV/CBL,
DVD
■ 1C for OPTICAL INPUT jacks
Choices: (2) MD/CD-R, CD, PHONO,
VCR 2/DVR, VCR 1, D-TV/CBL,
DVD
(3) MD/CD-R, CD, PHONO,
VCR 2/DVR, VCR 1, D-TV/CBL,
DVD
(4) MD/CD-R, CD, PHONO,
VCR 2/DVR, VCR 1, D-TV/CBL,
DVD
■ 1D for COAXIAL INPUT jack
Choices: (5) MD/CD-R, CD, PHONO, VCR 2/
DVR, VCR 1, V-AUX, D-TV/CBL,
DVD
Notes
• You cannot select a specific item more than once for the same
type of jack.
• When you connect a component to both the COAXIAL and
OPTICAL jacks, priority is given to the input signals from the
COAXIAL jack.
SET MENU
0108RX-V740_39-45_EN-U.p65 03.1.10, 6:35 PM 43