Yamaha VCD-102K - Manual (Page 14)

ECHO MPX KARAOKE KEY CONTROL DISC SKIP SKIP/SEARCH
PREV NEXT
+10 1 2 3 4 5 6 7 8 9 0
LEVEL
KEY CONTROL
MIC 1 MIC 2
OPEN/CLOSE
STOP/RETURN
PLAY/SELECT
PLAYXCHANGE
MIN MAX MIN MAX
14
Pressing the KEY CONTROL buttons change key of the track
currently playing. The current key level is shown on the
display. Whenever a track changes, its original key level is
restored.
: Whenever pressed, key of the track becomes lower in 6
steps.
: Pressing this button restores the original key level of
the track.
: Whenever pressed, key of the track becomes higher in
6 steps.
Adjustments for enjoying Karaoke
You can select any of four audio output modes by pressing the
MPX button.
Turning the LEVEL control clockwise increases the level, and
counterclockwise decreases the level.
Turning the ECHO control clockwise increases the level, and
counterclockwise decreases the level.
If you need no echo effect, set this control to the “MIN”
position.
Display
indication
Audio output mode
Normal stereo output
Sound from the left channel only is
output from both the left and right
speakers.
Sound from the right channel only is
output from both the left and right
speakers.
Sound of vocals on the source is
attenuated.
Note: There may be a case that
vocals cannot be attenuated
effectively according to a source.
In this mode, if a microphone is
connected to this unit, the “VC”
indication blinks. When you sing to
the microphone, vocal sound on the
source is attenuated. When the
microphone does not sense your
vocal, vocal sound on the source is
output.
L R
L
R
VC
LEVEL
MIN MAX
ECHO
MIN MAX
MPX
KEY CONTROL
KEY CONTROL
KARAOKE MPX
OPEN/CLOSE
ON SCREEN
PROG ENTER S/F REP CANCEL
1 2 3 4 5
6 7 8 9 0
+10
KEY
CONTROL
MPX
MPX KEY CONTROL ECHO LEVEL
Adjusting key of the track
currently playing
Changing audio output mode
Adjusting the level of sound signals
input from the microphone(s)
Adjusting the level of echo
applied to sound signals
input from the microphone(s)