Yamaha VCD-102K - Manual (Page 10)

1
If necessary, select a desired disc.
* If you want to play from the first track on the disc, press
the PLAY/REPEAT button.
2
Select a desired track number.
Selecting a track (by using the numeric
buttons)
For example:
To select track 5
Press “5”.
To select track 12
Press “+10”, then press “2”.
To select track 26
Press “+10” twice, then press “6”.
Note
If a track number higher than the highest track number on the
disc is selected, the last track on the disc will be played.
KARAOKE MPX
ON SCREEN
PROG ENTER S/F REP CANCEL
1 2 3 4 5
6 7 8 9 0
+10
DISC SKIP INTRO DIGEST
10
Display information
➀ Shows the tray number of the selected disc.
➁
Shows the selected track number.
➂
Shows the elapsed time of the selected track.
Note
If a Video CD, version 2.0 is selected, “PBC” lights up on the
display. In this mode, disc play is controlled by the rule of
Playback Control. (If, however, you select a disc and a track
number continuously as explained above, “PBC” does not light
up automatically.) For details of Playback Control, refer to
pages 18–20.
To cancel this mode and restore the normal play mode, press
and hold the STOP/RETURN button for more than 2 seconds.
“PBC” disappears from the display.
To call the Playback Control mode again, press and hold the
STOP/RETURN button for more than 2 seconds.
It is possible to change between the modes only when the unit
stops.
MUSIC DISC
VIDEO CD
AUTO
NTSC PAL
➂ ➁ ➀
To play a desired track
DISC SKIP
KEY CONTROL
KARAOKE MPX
OPEN/CLOSE
ON SCREEN
PROG ENTER S/F REP CANCEL
1 2 3 4 5
6 7 8 9 0
+10
DISC SKIP
TIME INDEX
INDEX
SEARCH
SKIP PREV
RETURN SELECT
NEXT
INTRO DIGEST
PAUSE SLOW PLAY/REPEAT STOP
1 2 3 4 5
6 7 8 9 0
+10
2
1
STOP/
RETURN