Xantrex Technology 1200 - Manual (Page 6)

v
Important Safety Information
General Precautions
1. Before installing and using the inverter, read all appropriate sections
of this guide as well as all instructions and cautionary markings on
the inverter and the batteries.
2. Do not operate the inverter if it has received a sharp blow, been
dropped, or otherwise damaged. If the unit is damaged, see
“Warranty” on page D–2 and “Return Material Authorization
Policy” on page D–3 .
3. Do not disassemble the inverter. It contains no user-serviceable
components. Refer servicing to qualified service personnel only.
Attempting to service the unit yourself could cause electrical shock
or fire. Internal capacitors remain charged after all power is
disconnected.
4. To reduce the risk of electrical shock, disconnect AC and DC power
from the inverter before working on any circuits connected to the
inverter. Turning off the On/Off Switch will not reduce this risk.
5. Do not expose the inverter to rain, snow, spray, or bilge water.
Important: Before installing and using your XPower Plus, be sure
to read these safety instructions and keep them handy.
CAUTION
Do not connect any AC load that has its neutral conductor
connected to ground to the XPower Plus.
CAUTION
Do not connect the AC output of this inverter to any other
source of power such as an electrical panel which itself
may be AC powered from a utility generator or other
source. Damage may occur.