Zhone Technologies 6381-A3-xxx - Manual (Page 2)

Technical Specifications
ADSL2+/ReachDSL Single Port Modem
Dimensions
■ 1.2" H x 6" W x 4.4" D (3.05cm H x 15.24cm W
x 11.8cm D)
Weight
■ 1.5lbs (shipping weight)
Power
■ Input: 100-240 VAC, 50/60 Hz
■ Output: 2V DC, 1.5A
Interfaces
■ DSL Line: RJ11
■ Phone: RJ11 (with integrated phone filter)
■ Ethernet: 10/100Base T
■ USB 1.1
Standards Support
■ ATM:
- RFC 1483/2684 Multiprotocol Encapsulation
over ATM
- Up to 8 PVCs, UBR, CBR, VBR
- OAM F5, F4 Loopbacks
■ PPP
- RFC 2364 PPP over ATM
- RFC 2516 PPP over Ethernet
- PAP/CHAP
■ Routing/Bridge
- IPv4, TCP, UDP, ICMP, ARP, RARP
- RIPv1, RIPv2
- Static Routing
- DHCP Server/Client/Relay
- DNS Proxy
- UPNP
- IGMP v1,v2 Snooping and Proxy
- IEEE 802.1d transparent bridging
■ Security
- NAPT
- Stateful Inspection Firewall
- PPP with PAP/CHAP
Protocol Support
■ ANSI T1.413 (Full Rate ADSL)
■ ITU G.992.1 (DMT)
■ ITU G.992.2 (G.lite)
■ ITU G.992.3 (ADSL2)
■ ITU G.992.5 (ADSL2+)
■ ITU G.994.1 (G.hs)
■ ITU G.997.1
■ Zhone ReachDSL 2.2
Management
■ Web based User Interface
■ Firmware Upgradeable via HTTP
■ Telnet Server
■ TFTP Server and Client
■ SNMP
Bandwidth/Distance
■ Downstream Speeds up to 24 Mbps using
ADSL2+ (2.2 Mbps with ReachDSL)
■ Upstream speeds up to 2 Mbps with ADSL2+ (1
Mpbs with ReachDSL)
Regulatory Compliance
■ FCC Part 68
■ FCC Part 15
■ CE
■ UL
■ TUV
■ ReachDSL 2.2 Spectral Compliance:
- ANSI T1.417
- ANSI T1.413
- UK ANFP
- ETSI TR101 830-1
- Approved for all loops in Japan by the TTC
Operating Requirements
■ Temperature: 32F to 104F (0C to 40C)
■ Non-operating temperature: -4F to 149F (-20C
to 65C)
■ Humidity: 5% to 95%, non-condensing
Ordering Information
6381-A4-200 ADSL2+/ReachDSL CPE Router (TI), 10/100BaseT, N.A.
6381-A4-300 ADSL2+/ReachDSL CPE Router (TI), 10/100BaseT, U.K.
6381-A4-302 ADSL2+/ReachDSL CPE Router (TI), 10/100BaseT, EURO
6381-A4-600 ADSL2+/ReachDSL CPE Router (TI), 10/100BaseT, Japan
05 December 2012 17:19:49