Philips HP3621 - Manual (Page 6)

Note: If the lamp stops working during the guarantee period, do not attempt to replace it yourself, but contact the Consumer Care Centre to have the
appliance replaced.
Environment
Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the environment (Fig. 14).
guarantee & service
If you need service or information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Consumer
Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your
country, go to your local Philips dealer.
troubleshooting
If the appliance does not work or does not work properly, first check the list below. If the problem is not mentioned in this list, the appliance
probably has a defect. In that case we advise you to contact the Philips Consumer Care Centre.
Problem Cause Solution
The appliance does not go on. The plug may not be inserted properly into
the wall socket.
Insert the plug properly into the wall socket.
There may be a power failure. Check if the power supply works by connecting another
appliance.
The lamp may be defective. Contact the Philips Consumer Care Centre.
The mains cord of the appliance may be
damaged.
Check the mains cord. If the mains cord is damaged, you must
have it replaced by Philips, a service centre authorised by
Philips or similarly qualified persons in order to avoid a hazard.
specifications
Model HP3621
Rated voltage (V) Hong Kong/Singapore/Europe 230
Rated voltage (V) China/Korea 220
Rated voltage (V) Malaysia 240
Rated voltage (V) Taiwan 110
Rated frequency (Hz) Hong Kong/Singapore/Europe 50/60
Rated frequency (Hz) China/Malaysia 50
Rated frequency (Hz) Korea/Taiwan 60
Rated input (W) 200
Class II
Classification not classified
Ingress of water IPX0
IR type IR-A/B/C
Irradiance (W/m²) approx. 850
Field dimensions (in cm²) 30x20
Battery type not applicable
Operation conditions
Temperature from +10°C to +35°C
Relative humidity from 30% to 90%
Storage conditions
Temperature from -20°C to +50°C
Relative humidity from 30% to 90% (no condensation)
Circuit diagrams, component part lists and other technical descriptions are available on request.
As user of this appliance, you should take measures to prevent the occurrence of electromagnetic interference or other types of interference
between this appliance and other appliances.
-
EnglisH 6