beautypg.com

The roxy thtr – Yamaha HTR-5930 User Manual

Page 28

background image

24

PLAYBACK

5

Rotate VOLUME on the front panel (or press
VOLUME +/– on the remote control) to adjust
the volume to the desired output level.

If you connected a recording component to the VCR OUT,
or MD/CD-R OUT (REC) jacks, and you notice distortion
or low volume during playback from other components, try
turning on the recording component.

6

Press TONE CONTROL on the front panel
repeatedly to select “BASS” or “TREBLE”
and then press BASS/TREBLE +/– to adjust
the corresponding frequency response level.

• Select “BASS” to adjust the low-frequency

response.

• Select “TREBLE” to adjust the high-frequency

response.

• Speaker and headphone adjustments are stored

independently.

• When “TONE BYPASS” (see page 55) is set to “AUTO”,

and “BASS” and “TREBLE” are set to 0 dB, audio output
automatically bypasses the tone control circuitry of this
unit.

• If you increase or decrease the high-frequency or low-

frequency sound to an extreme level, the tonal quality of
the surround speakers may not match that of the front left
and right speakers.

• TONE CONTROL is not effective when the component

connected to the MULTI CH INPUT jacks is selected as
the input source (see page 25).

7

Press PROGRAM l / h on the front panel
repeatedly (or press one of the sound field
program selector buttons on the remote
control repeatedly) to select the desired
sound field program.
The name of the selected sound field program appears
in the front panel display.
See page 31 for details about sound field programs.

• Choose a sound field program based on your listening

preference, not merely on the name of the program.

• When you select an input source, this unit automatically

selects the last sound field program used with the
corresponding input source.

• Sound field programs cannot be selected when the

component connected to the MULTI CH INPUT jacks is
selected as the input source (see page 25).

• When sampling frequencies higher than 48 kHz are input,

this unit is automatically set to the “STEREO” mode.

• To display information about the currently selected input

source in the front panel display, see page 28 for details.

Note

Notes

VOLUME

VOLUME

+

or

TONE CONTROL

BASS/TREBLE

Notes

l PROGRAM h

STRAIGHT

NIGHT

ENT.

+10

0

9

8

7

6

5

4

3

2

1

B

5CH STEREO

STANDARD

MOVIE

ENTERTAIN

SPEAKERS

A

2CH STEREO

MUSIC

Front panel

or

Remote control

The Roxy Thtr

Currently selected

surround field program