Yamaha HTR-5930 - Manual (Page 25)

21
SETUP
PREP
ARA
TION
6
Press d to confirm your selection and then
press j / i to select the number of speakers
connected to this unit.
7
Press d to confirm your selection.
“iSET CANCEL” appears in front panel display.
8
Press j / i to select the desired setting.
Choices: SET, CANCEL
• Select “SET” to apply the settings you made.
• Select “CANCEL” to cancel the setup procedure
without making any changes.
y
You can also press SET MENU repeatedly to cancel the
setup procedure.
9
Press d to confirm your selection.
If you selected “SET” in the previous step, you will
hear a test tone from each speaker in turn.
“CHECK:TestTone” appears in the front panel
display for a few seconds and then “CHECK OK?”
appears in the front panel display.
y
The indicator of the speaker currently outputting the test
tone flashes in the front panel display.
10
Press j / i to select the desired setting.
Choices: YES, NO
• Select “YES” to complete the setup procedure if
the test tone levels from each speaker were
satisfactory.
• Select “NO” to proceed to the speaker level
adjustment menu to balance the output level of
each speaker.
11
Press d to confirm your selection.
• If you selected “YES” in the previous step, the
setup procedure is completed and the display
returns to the “BASIC MENU”.
• If you selected “NO” in the previous step, the
speaker level adjustment display appears in the
front panel display.
Choice Display Speakers
2spk Front L/R
3spk Front L/R, Center
4spk Front L/R, Surround L/R
5spk Front L/R, Center, Surround L/R
ENTER
PRESET/CH
A-E/CAT.
+ – ENTER
PRESET/CH
A-E/CAT.
+ –
L L C R
SL SB SR
L L C R
SL SB SR
L L C R
SL SB SR
L L C R
SL SB SB SR
ENTER
PRESET/CH
A-E/CAT.
+ –
ENTER
PRESET/CH
A-E/CAT.
+ –
ENTER
PRESET/CH
A-E/CAT.
+ –
ENTER
PRESET/CH
A-E/CAT.
+ –
ENTER
PRESET/CH
A-E/CAT.
+ –