Yamaha CD-S1000 - Manual (Page 11)

11
En
6 (Search backward), (Search forward)
Searches tracks backward/forward.
y
Each time you press or , the search speed increases by 4
levels.
7 (Skip backward), (Skip forward)
: Skips to the next track.
: Skips back to the beginning of the current track.
(twice): Skips to the previous track.
8 OPEN/CLOSE
Opens or closes the disc tray.
9 PURE DIRECT
Turns on the PURE DIRECT mode to improve audio
quality.
When this unit is in the PURE DIRECT mode:
• The PURE DIRECT indicator above lights up.
• Audio signals are not output at the OPTICAL
DIGITAL OUT jack and the COAXIAL DIGITAL
OUT jack (see page 8).
• The front panel display is turned off and only the
minimum required indicators and messages are
displayed.
y
This setting is retained even if you turn off this unit.
0 DISPLAY
Switches the time display. Each time you press DISPLAY
during playback, the time display changes as follows:
• Elapsed time of the current track (default setting): The
TRACK indicator lights up in the front panel display.
• Remaining time of the current track: The TRACK and
REMAIN indicators light up in the front panel display.
• Total remaining time of the disc: The TOTAL and
REMAIN indicators light up in the front panel display.
A CLEAR
Erases the last programmed track when this unit is in the
program editing mode. See “Program playback” on this
page.
y
You can erase all programmed tracks when the playback is
stopped.
B ENTER
Confirms a track number entered when you are
programming tracks.
C RANDOM
Turns on or off the random playback mode.
• This operation is ineffective for MP3 or WMA discs.
• The random playback mode is canceled when playback is
stopped or the disc is ejected.
D PROGRAM
Turns on or off the program playback mode. See “Program
playback” on this page.
E (Pause)
Pauses playback. Press or to resume playback.
F (Play)
Starts playback.
G (Stop)
Stops playback.
■ Program playback
In the program playback mode, you can play back tracks
in a programmed sequence.
• This operation is ineffective for MP3 or WMA discs.
• The programmed tracks are erased when the disc is ejected or
this unit is turned off.
1
Press PROGRAM while playback is stopped.
This unit is set to the program editing mode.
2
Select a track by using the numeric buttons
and ENTER.
3
Repeat step 2 to program the next track.
You can program up to 24 tracks.
4
Press p.
Playback starts from the beginning of the
programmed sequence.
Notes
See pages 20 for more information on MP3/WMA
playback.
Notes
Eng
lish