ZyXEL Communications P-870M-Ix v2 - Manual (Page 4)

P-870M-Ix v2 Series User’s Guide
4
If the POWER, ETHERNET, and DSL lights are on (or
blinking), you have set up the P-870M-Ix v2 correctly. Test
your Internet connection by visiting
http://www.zyxel.com (or
another web site).
If the lights behave differently or if you cannot connect to the
Web site, make sure the connections are correct. If the lights
are still different, turn off the device, wait a few seconds, and
turn it on again. If the problem continues, contact your local
vendor.
2 LEDs
The following figure shows the P-870M-Ix v2’s LEDs.
The following table describes the LEDs.
Light Status Description
POWER Green The P-870M-Ix v2 is receiving power and
ready for use.
Off The P-870M-Ix v2 is not receiving power.