Yamaha RX-V1700 - Manual (Page 2)

AC IN
AC OUTLETS
To the AC wall outlet
Step 3. Insert the Firmware Update CD (Audio CD) into the CD/DVD Player and close the tray. If the disc
begins to play, press the STOP botton on the CD/DVD Player.
3a) If a DVD Player is being used to perform this update, make sure that the DVD Player is set
to PCM Digital Bitstream. See the DVD Player Owner’s Manual for instructions on how to
configure the PCM Digital Bitstream. Once update is complete, restore DVD Player to its
original settings.
AC IN
AC OUTLETS
To the AC wall outlet
Fig 2.0
Fig 3.0
Fig 4.0 Fig 4.1
Step 4. Unplug the AC power cable
from the back of the Yamaha receiver,
as shown in FIG 2.0.
Step 5. On the front panel of the Yamaha receiver,
push the MASTER button to the “ON” position, as
shown in FIG 3.0. You can find operational details in
the owner’s manual.
MASTER
MAIN ZONE
INPUT
ON
OFF
PRESET/TUN
MIC
OPTIMIZER
EFFECT
STRAIGHT
CATEGORY
CONTROL SELECT
AUDIO TONE A/B/C/D/E
PROGRAM
YPAO SILENT CINEMA
PHONES
ON/OFF
MASTER
ON
OFF
Step 6. Press and hold the MAIN ZONE ON/OFF button and keep it pressed, as shown in FIG 4.0
while you plug the AC power cord back into the Yamaha receiver, as shown in FIG 4.1. Once the
front panel displays “
CDDA UPGRADER ” you can let go of the MAIN ZONE ON/OFF button.
MASTER
MAIN ZONE
INPUT
ON
OFF
SELECT
AUDIO
PR
ON/OFF