Zenoah BK2650DL User Manual
Page 4
GB-4
BK2650DL
Model
BK2650DL
Overall size (LxWxH)
mm
2616 x 306 x 336
Dry weight
kg
8.3
Engine
Model
Zenoah G26LS
Displacement
cm
3
25.4
Fuel
Mixture (Gasoline 50 : Oil 1)
Carburetor
Diaphragm type
Ignition system
Flywheel magneto (C.D.I.)
Spark plug
NGK BPMR 7A
Fuel tank capacity
L
1.1
Starter
Recoil starter
Clutch
Centrifugal type
Reduction ratio
1.67
Cutting head rotating direction
Counter-clockwise (Operator view)
Specifications are subject to change without notice.
2. Specification
3. Warning labels on
the machine
4. Symbols on the ma-
chine
For safe operation and maintenance, symbols are carved
in relief on the machine. According to these indications,
please be careful not to make a mistake.
Read owner’s manual before oper-
ating this machine.
Wear head, eye and ear protec-
tion.
Warning / Attention
Keep all children, bystanders and helpers 15
meters away from the machine.
Never modify your machine.
We won’t warrant the machine, if you use the
remodeled brushcutter or if you don’t observe
the proper usage written in the manual.
If warning label peels off or becomes soiled and
impossible to read, you should contact the
dealer from which you purchased the product
to order new labels and affix them in the required
location(s).
The port to refuel the “MIX GASOLINE”
Position:
FUEL TANK CAP
The direction to close the choke
Position:
ENGINE COVER
The direction to open the choke
Position:
ENGINE COVER