beautypg.com

Zanussi ZMD30STQ User Manual

Page 14

background image

ZMD30STQ

t

14

When your oven is plugged in for the first time or when power resumes after a power interruption, the display
window flash and show " ---- "

Example: To set 4.30

1. Touch the Clock button.

2. Set the time to " 4:00 " using the setting control knob

3. Touch the Clock Button

4. Set the time to " 4:30 " using the setting control knob

5. Touch the Clock button. (The Time will now be set)

NOTE :

It is possible to display the current time even after starting the mode set, by pressing the
Clock button (the time is displayed for 2 seconds).

The oven is equipped with a safety device which prevents pre-set cooking times from being tampered with
while the cooking is underway, in order to avoid accidental and dangerous extensions to the cooking time
which might cause the food to burn.

To set:

1. Touch and hold the ’ Stop ’ button for 5 sec’s, a beep will be heard.

To cancel the child lock, simply touch and hold the ’ Stop ’ button for 5 sec’s, a beep will be heard.

There are two way to stop the oven whilst it is in use.

1. Press the Stop/Clear button

You may restart the oven by pressing the Start button

Pressing Stop/Clear again will reset the current programme

2. Open the door

You may restart the oven by closing the door and pressing the Start button

Pressing Stop/Clear again will cancel the current programme

At the end of each cooking the cooling fan will remain in operation until the oven door is opened.

Setting the Clock

Child safety lock

To Stop the Oven