Zanussi ZV11R - Manual (Page 15)

15 Zanussi 818 15 02--00/9
Door Reversal
1. Close the cabinet and pull out the plug from the
electrical outlet.
2. Remove the ventilation grille. There is a part on
the grille that can be removed. Remove it and
transfer to the opposite side.
3. Support the cabinet on a wooden block when it is
laid down. It will be easier to grip under the cabinet
when resupporting to an upright positon.
4. On the upper part of the cabinet. Put the hinge pin
on the other side.
5. On the lower part of the cabinet. Unscrew the
hinge. Move the hinge pin and plastic cover. Secure
the hinge on the other side.
Raise the cabinet and replace the ventilation grille.
6. Unscrew the handle. Carefully press in the plastic
plugs on the opposite side using a punch. Secure the
handle in the plug holes. Then press the supplied
plastic plugs into the holes to which the handle was
previously fitted.
7. Put the cabinet in position. Check that it stands
straight. See the section ”Positioning the cabinet”.
2
3
4
6