Yamaha MT8XII - Manual (Page 4)

iii
MT8XII—Owner’s Manual
Important
Read the Following Before Operating MT8XII
Warnings
• Do not locate MT8XII in a place subject to excessive heat or in direct sunlight. This could be
a fire hazard.
• Do not place MT8XII in a place subject to excessive humidity or dust. This could be a fire
and electrical shock hazard.
• Connect the supplied AC power cord only to an AC outlet of the type stated in this Owner’s
Manual or as marked on the main unit. Failure to do so is a fire and electrical shock hazard.
• Do not plug several devices into the same AC outlet. This can overload the AC outlet, and
can be a fire and electrical shock hazard. It may also affect the performance of some devices.
• Do not place heavy objects on the power cord. A damaged power cord is a potential fire and
electrical shock hazard.
• If the power cord is damaged (i.e., cut or a bare wire is exposed), ask your dealer for a
replacement. Using MT8XII in this condition is a fire and shock hazard.
• Hold the AC power cord plug when disconnecting from an AC outlet. Never pull the cord.
Damaging the power cord in this way is a potential fire and electrical shock hazard.
• Do not place small metal objects on top of MT8XII. Metal objects inside MT8XII are a fire
and electrical shock hazard.
• Do not block the MT8XII ventilation holes. MT8XII has ventilation holes at the rear to pre-
vent the internal temperature from rising. Blocked ventilation holes are a fire hazard.
• Do not try to modify MT8XII. This could be a fire and electrical shock hazard.
• MT8XII operating temperature is between 5˚C and 35˚C (41˚F and 95˚F).
Cautions
• Turn off all audio devices and speakers when connecting to MT8XII. Refer to the owner’s
manual for each device. Use the correct cables and connect as specified.
• MT8XII is a precision device. Handle it with care.
• If you notice any abnormality—such as smoke, odor, or noise—turn off MT8XII immedi-
ately. Remove the AC power cord from the AC outlet. Confirm that the abnormality is no
longer present. Consult your dealer for repair. Using MT8XII in this condition is a fire and
shock hazard.
• If a foreign object or water gets inside MT8XII, turn it off immediately. Remove the AC
power cord from the AC outlet. Consult your dealer for repair. Using MT8XII in this condi-
tion is a fire and electrical shock hazard.
• If you plan not to use MT8XII for a long period of time (such as when you are on vacation),
remove the AC power cord from the AC outlet. Leaving MT8XII connected is a fire hazard.
• Do not use benzene, thinner, cleaning detergent, or a chemical cloth to clean MT8XII.
• Use only a soft, dry cloth to clean MT8XII.