ZyXEL Communications NBG410W3G Series - Manual (Page 53)

NBG410W3G Support Note
All contents copyright (c) 2008 ZyXEL Communications Corporation.
53
Product FAQ
Wireless section
Q1: What do the signal indicators mean on my NBG410W3G series?
This is only adapted in the model NBG410W3G. As for the signal indicator in the NBG410W3G,
you can refer to the following table to check the meaning of signal strength.
3G Operation 3G
Off
3G is not enabled, or
3G is not registered to network, or
User chooses USB dongle as 3G interface.
Blue
Blinking
Module is registered to 3.5G network, but
not connected yet.
Blink once every 5 seconds.
On
Module is connected to 3.5G network and
ready to transfer data.
Green
Blinking
Module is registered to 3G network, but not
connected yet.
Blink once every 5 seconds.
On
Module is connected to 3G network and
ready to transfer data.
Orange
Blinking
Module is registered to 2G or 2.5G
network, but not connected yet.
Blink once every 5 seconds.
ON
Module is connected to 2G or 2.5G
network and ready to transfer data.
3G Signal Strength Signal
Off
3G is not enabled, or
No signal is detected, or
User chooses USB dongle as 3G interface.
Blue
3G signal status at Strong (-86dBm ~ -47dBm) 3G
signal strength
Green
3G signal status at Medium (-101dBm ~-87dBm) 3G
signal strength
Orange
3G signal status at Low (-110dBm ~ -102dBm) 3G
signal strength
The following figure is for the model NBG412W3G. As for the signal indicator in the NBG412W3G,
you can refer to the following table to check the meaning of signal strength.
3G Mode 3G
Off 3G is not enabled
Green 3G is enabled
3G Link Signal
Off 3G does Not connected to Network
Green 3G Connects to Network