Yamaha DSP-A970 - Manual (Page 39)

37
English
2-8. REMOTE CONTROL “LEARNING” FUNCTION
The remote control unit, in addition to controlling the most
commonly used functions of the main unit and other connected
Yamaha audio and video equipment, has a sophisticated “learning”
function that allows it to control other equipment in your system
equipped with infrared remote control receivers. By setting the
YPC/USER/LEARN switch on the remote control unit to “LEARN”, all
keys will turn into “learnable function keys”, each capable of
“learning” a different remote control function. Also, each key can
learn two different functions by switching the learning page (1 or 2)
with the 1/2 switch. However, as for the keys shaded in the following
figure, the PARAMETER/SET MENU switch will select the learning
page number (1 or 2) instead of the 1/2 switch.
Learning a New Remote Control Function
1. Select the learning page number (1 or 2) by using the 1/2 switch.
2. Set the YPC/USER/LEARN switch to “LEARN”.
3. Aim the infrared transmitter window of the other remote control
unit.
4. Press the key that is to have a new function assigned to it. The
TRANSMIT/LEARN indicator will illuminate.
5. Press and hold down the button on the other remote control unit
corresponding to the new function to be learned. Hold the button
down until the TRANSMIT/LEARN indicator is extinguished. The
function has now been learned.
6. Repeat steps 4 and 5 to learn additional functions.
7. Set the YPC/USER/LEARN switch to “USER”. Pressing the
learned key will now perform the assigned function. Provided user
program sheets should be used to record the functions learned by
the various keys.
PARAMETER/SET MENU switch