Replacing the oven light, Oven shelves and shelf supports – Zanussi Oven User Manual

Page 10

Replacing the Oven Light

Ensure the electricity supply is switched off

before carrying out this operation.

The oven bulb has to comply to these features:

a) resistant to temperatures of 300 °C;

b) electric rate: 230 V - 50 Hz;

c) electric power rate:

15 W;

d) connection type: E 14.

To replace the bulb, proceed as follows (Fig. 10):

a) push in and turn the glass lid anticlockwise;

b) remove tha faulty bulb;

c) replace it with a new one;

d) refit the glass lid;

e) switch on the electricity supply.

FO 0287

Fig. 10

Oven Shelves and Shelf

Supports

To clean the oven shelves, soak in warm soapy water and

remove stubborn marks with a well wetted soap

impregnated pad. Rinse well and dry with a soft cloth.