Yamaha RX-V365 User Manual

Page 30

Sound field programs

■ Selecting decoders for 2-channel sources

(surround decode mode)

Signals input from 2-channel sources can also be played
back on multi-channels.

Press hAMP and then press sSUR. DECODE
repeatedly to select a decoder.
You can select from the following decoders depending on
the type of source you are playing and your personal
preference.

■ Editing sound field parameters
Although you can enjoy good quality sound with the
factory default parameters, you can change some of the
parameters to better suit the input source or your listening
room.

While listening to a source, press hAMP
and then press lk / n to select desired
parameter.

Press ll / h to change the parameter
value.

Note

• You cannot change parameter values when “MEM.GUARD” in

“OPTION MENU” is set to “ON” (see page 35).

• Initial settings are indicated by (*) in the following each parameter.

For Pop/Rock, Hall, Jazz, Game, TV Sports, Movie
Spacious and Movie Dramatic:

For PRO LOGIC II Music:

For Music Enh. 2ch and Music Enh. 5ch

■ Using sound field programs without

surround speakers (Virtual CINEMA DSP)

Virtual CINEMA DSP allows you to enjoy the CINEMA
DSP sound field programs without surround speakers.
When you set “SUR. L/R” to “NONE” (see page 33),
Virtual CINEMA DSP is activated automatically
whenever you select a CINEMA DSP sound field program
(see page 25).

■ Enjoying multi-channel sources and sound

field programs with headphones (SILENT
CINEMA)

SILENT CINEMA allows you to enjoy multi-channel
music or movie sound through ordinary headphones.
SILENT CINEMA is activated automatically whenever
you connect headphones to the PHONES jack while
listening to CINEMA DSP sound field programs (see
page 25).

• When it is activated, the SILENT CINEMA indicator lights up on the

front panel display.

■ Enjoying unprocessed input sources

(Straight decoding mode)

When this unit is in the “STRAIGHT” mode, 2-channel
stereo sources are output from only the front left and right
speakers. Multi-channel sources are decoded straight into
the appropriate channels without any additional effect
processing.

Press MSTRAIGHT (or press hAMP and then
tSTRAIGHT) to select “STRAIGHT.”
“STRAIGHT” appears on the front panel display.

To deactivate the “STRAIGHT” mode
Press MSTRAIGHT (or tSTRAIGHT) again so that
“STRAIGHT” disappears from the front panel display.

STANDARD

Function

PRO LOGIC

Dolby Pro Logic processing for any sources

PLII Movie

Dolby Pro Logic II processing for movie

sources

PLII Music

Dolby Pro Logic II processing for music

sources

PLII Game

Dolby Pro Logic II processing for game

sources

DSP level

DSP LEVEL

Function:

Adjusts the effect level.

Choices:

MIN, MID*, MAX

Panorama

PANORAMA

Function:

Sends stereo signals to the surround

speakers as well as the front speakers for a

wraparound effect.

Choices:

OFF*, ON

Dimension

DIMENSION

Function:

Gradually adjusts the sound field either

towards the front or towards the rear.

Control range:

–3 (towards the rear) to +3 (towards the

front), initial setting is STD (standard).

Center width

CT WIDTH

Function:

Adjusts the center image from all three front

speakers to varying degrees. A larger value

adjusts the center image towards the front

left and right speakers.

Control range:

0 (center channel sound is output only from

center speaker) to 7 (center channel sound is

output only from front left and right

speakers), initial setting is 3.

Effect level

Function:

Adjusts the effect level.

Choices:

LOW, HIGH*