Yamaha RX-N600D User Manual
Page 120
118
En
TROUBLESHOOTING
Status message
Cause
Remedy
See
page
Please wait
This unit is in the middle of recognizing
the connection with your network.
This is not a system malfunction. Wait for a
while.
—
This unit is in the middle of recognizing
the connection with your USB memory
device or USB portable audio player.
This is not a system malfunction. Wait for a
while.
—
Please wait
(Starting Server)
This unit is in the middle of waking up
MCX-2000 that has been set to the
standby mode.
Wait for approximately 20 seconds.
—
Connect error
There is a problem with the signal path
from your network to this unit.
Check the connection between this unit and the
LAN port on your router or hub.
Make sure your router is properly connected and
turned on. Also, make sure your modem is
properly connected and turned on when you are
attempting to listen to Internet radio.
Disconnected
Your USB memory device or USB
portable audio player has been
disconnected from the USB port of this
unit.
Check the connection between this unit and your
USB memory device or USB portable audio
player.
—
The PC server or MCX-2000 previously
connected to this unit no longer exists.
Connect this unit to the available PC server or
MCX-2000.
There is a problem with the signal path
from your USB memory device or USB
portable audio player to this unit.
Turn off this unit and reconnect your USB
memory device or USB portable audio player to
the USB port of this unit.
Try resetting your USB memory device or USB
portable audio player.
—
Access error
This unit cannot access your USB
memory device or USB portable audio
player.
Try another USB memory device or USB portable
audio player.
—
There is a problem with the signal path
from your USB memory device or USB
portable audio player to this unit.
Turn off this unit and reconnect your USB
memory device or USB portable audio player to
the USB port of this unit.
Try resetting your USB memory device or USB
portable audio player.
—
Unable to play
This unit cannot play back the songs
currently stored on your PC.
Make sure Windows Media Connect 2.0 is
installed on your PC.
—
Check that the songs currently stored on your PC
are playable (MP3, WMA, and WAV).
—
Store some other playable music files (MP3,
WMA, and WAV) on your PC.
—
The network may be overloaded with
heavy traffic, and playback is interrupted.
Try preparing a network exclusively for use with
this unit to separate it from general network
traffic.
—
List updated
The list of the contents stored on your PC
server or MCX-2000 has been updated.
Bookmark ON
The desired Internet radio station has
been added to the “Bookmarks” list.
Bookmark OFF
The stored Internet radio station has been
removed from the “Bookmarks” list.