ZyXEL Communications PLA401 v2 - Manual (Page 7)

7
ENGLISH
4 While the devices are connecting, the power ( ) and
HomePlug ( ) lights blink. Also several times all lights
blink at the same time and the HomePlug ( ) light shows
red.
5 Wait for about one minute while your powerline devices
connect. The power ( ) light is steady when the
ENCRYPT process times out, the HomePlug ( ) light is
steady if you have a successful connection.
V
If the power ( ) light does not blink, you have
probably pressed the ENCRYPT button for too
long. Try again, pressing the ENCRYPT button
for 1~2 seconds.
V
If the HomePlug ( ) lights on both powerline
devices do not light up, the powerline devices
are not connected. Repeat steps 2 and 3 in this
section. If that doesn’t work, see the User’s
Guide for more suggestions.
6 To add another powerline device (C) to your network,
connect it with one of the powerline devices (A or B)