Zanussi ZJB 9476 X - Manual (Page 31)

31
• If using a 100 mm plinth, fit the complete height
compensation strip.
Alignment height of 870 mm
• If using a 190 to 220 mm plinth, make a shown.
• If using a plinth higher than 150 mm but less than
190 mm, cut the height compensation strip
supplied with the appliance to the required depth
and fit it between the plinth and the ventilation
grille.
• If using a 150 mm plinth, fit the complete height
compensation strip.
• If the appliance is installed at the end of a row of
units, insert foot E to hold the plinth in place.
100
150
30
100
E