X-Micro Tech. EPIC - Manual (Page 8)

(8) If no operations occurred for 60 seconds in stop mode, the
player will turn off automatically.
4.2. Recording Operation
(1) Press Record Button to start recording. LED will keep
blinking, and the ”REC” icon will flash, too. Elapsed
recording time will be shown in the display. (Figure 4.2.1)
Figure 4.2.1
(2) To stop record, press Record Button again. LED will light off,
and the beginning of the playing time will be indicated in the
display. ”DVR” icon turns up while ”REC” icon disappears.
(Figure 4.2.2)
To pause the record, press Switch Controller. To resume it,
press Switch Controller again.
Figure 4.2.2
(3) To play the previous recorded WAV files in stop mode,
press Switch Controller. The display will show the selection
number and the playing time. (Figure 4.2.3)
To switch between MP3 and record mode in stop mode,
press Mode Key.
Figure 4.2.3
(4) Press Switch Controller to pause the playback, playing time
will be paused as well. (Figure 4.2.4)
(5) Press Switch Controller to resume playback.
Figure 4.2.4
(6) If the space in the Flash Memory is used up during record,
LCD will show ”FULL” (Figure 4.2.5) and record will stop.
Press any key to go back to record stop mode.
File deletion, selection, fast forward and fast backward in
record mode are the same as in MP3 / WMA mode.
Figure 4.2.5
7