X-Micro Tech. EPIC - Manual (Page 6)

3. Quick Start
MP3/WMA Playback
Steps:
1. Press 3 seconds on Switch Controller to turn on the player.
2. LED will blink when you press Switch Controller. After blinking, LCD will show HELLO .
3. If there are already MP3 or WMA files in the Flash Memory, the LCD will show 01 0:00 , and the
LED will light up. To begin the playback of MP3 or WMA file, press again Switch Controller .
Record Operation
Steps:
1. Press 3 seconds on Switch Controller to turn on the player.
2. Press Record Button to enter record mode. LED will blink, and the ”REC” icon in the display will
blink, too. The time in the display will increase from 0:00 .
3. Press again Record Button to stop record and then enter the record playback mode. The ”REC”
icon will disappear and the ”DVR” icon will show up in the display. LED will light off.
4. To play the previous recorded WAV files, press Switch Controller in record playback mode.
Connecting to PC
Steps:
1. Use USB cable to connect to PC’s USB port, the player will be turned on automatically.
2. The USB indication will show up in the display. While connecting to PC, the display will
show ”--USB----”, and LED will blink.
4. Once the connection is completed, LED will light up, and”-- --PC-- --” will appear in the display. You
will see a “Removable Disk” in My Computer.
5