beautypg.com

Important safety requirements, Instructions for the installer, Dimensions – Zanussi ZCM 631 User Manual

Page 19: Technical data, Oven, Provision for ventilation

background image

19

BURNER

ULTRA-RAPID

SEMI-RAPID

AUXILIARY

(large)

(medium)

(small)

POSITION

MAX

MIN

MAX

MIN

MAX

MIN

NOMINAL THERMAL

POWER kW

3.5

1.2

2.0

0.45

1.0

0.33

NOMINAL FLOW

RATE m

3

/h

0.333

0.114

0.190

0.043

0.095

0.031

NOZZLE REFERENCE

136

Adjust.

96

Adjust.

70

Adjust.

NOMINAL THERMAL

POWER kW

3.5

1.2

2.0

0.45

1.0

0.33

NOMINAL FLOW

RATE g/h

252

86.5

144

32

72

24

NOZZLE REFERENCE

93

56

71

32

50

28

NATURAL

GAS

20

mbar

TYPE

OF

GAS

CHARACTERISTICS

LPG GAS

28-30/37

mbar

1/100 mm

1/100 mm

VALUE

=

49.92

MJ/Kg

VALUE

=

37.78

MJ/m

3

Ws

- 50.7

MJ/

m

3

Important Safety Requirements

This appliance must be installed in accordance with the

Gas Safety (Installation and Use) Regulations (current

addition) and the I.E.E. Wiring Regulations. Detailed

recommendations are contained in the following British

Standard Codes of Practice - B.S. 6172, B.S. 5440: Part

2 and B.S. 6891: Current Editions.

Appliance Class 2 sub class 1 and Class 1
APPLIANCE CATEGORY:

II 2H3+

APPLIANCE GAS SUPPLY: Natural gas G20 20mbar

Dimensions

Height

900 mm

Depth

600 mm

Width

600 mm

Oven Capacity

1.8 Cu. ft

Hob

Rear right burner (semi-rapid)

2,000 W

Front right burner (auxiliary)

1,000 W

Rear left burner (semi-rapid)

2,000 W

Front left burner (ultra-rapid)

3,500 W

Technical Data

Instructions for the Installer

Oven

Top heating element

835 W

Bottom heating element

1,045 W

Oven element

1,880 W

Grill Element

1,830 W

Convection heating element

2,090 W

Convection fan

30 W

Oven light

15 W

Total rating

2,135 W

Supply voltage (50 Hz)

230-240 V

Provision for Ventilation

The room containing the cooker should have an air supply

in accordance with B.S. 5440: Part 2: Current Editions.

The following requirements for ventilation must be met.

The cooker should not be installed in a bed sitting room

with a volume of less than 20m

3

, if it is installed in a

room of volume less 5m

3

an air vent of effective area of

110cm

2

is required; if it is installed in a room of volume

between 5m

3

and 10m

3

, an air vent of effective area 50cm

2

is required, while if the volume exceeds 11m

3

no air vent

is required. However, if the room has a door which opens

directly to the outside, no air vent is required even when

the volume is between 5m

3

and 11m

3

.