VDO Z2 PC - Manual (Page 44)

35
INSTRUCTION MANUAL
TIP: Leave your VDO computer on the handlebar holder so that sleep
mode is activated and recording is interrupted automatically after 5
minutes (see chapter 15 Sleep mode).
ATTENTION: If you manually interrupt data recording, for a break for ex-
ample by pressing ≈ + ç , then a new data record will be generated
at restart. Even if you do a trip data reset during „DATA RECORDING“
your VDO computer will generate a new data record.
14.2. TRANSFERRING DATA TO YOUR PC >>> P11
Install the PC-Sport software on your PC. Insert your VDO computer into
the docking station as shown and connect the USB cable to one of your
computer‘s USB ports. Now start PC Sport
- Under „FILE“ select Import
- In Import select VDO series Z
Click on the Start button in the PC Sport program, then on the Z3 go to
setting mode
3 sec.
ç Setting mode LANGUAGE SELECT
∂ ƒ PC LINK SELECT
‚ PC LINK SENDING (the data transfer is indicated in
the display by changing numbers)
Now the PC receives the data of your VDO computer. Data transfer is
indicated by the changing numbers in the computer‘s display.
NOTE: When importing the files the PC-Sport program detects which
files have already been imported. If you want to import this again you
must select it manually and confirm a warning query.
Now follow the instructions on saving files in the PC-Sport program.
Please see the PC Sport electronic user manual on the CD-ROM for all
additional information relative to planning and analysis of training units
14.3. SELECTION OF THE RECORDING INTERVAL
Your VDO computer offers two recording intervals (10 seconds or 20
seconds) for data recording.
Interval 1:
20 seconds
Maximum recording period: 100 hours
Selection of the recording interval: Press ¥ + √
Interval 2: 10 seconds
Maximum recording period: 50 hours
Selection of the recording interval: Press ¥ + √
Now the recording interval that has been set is shown in the display:
DATA
RECORD
INTERVAL
10
SEC
20 SEC
∂ ƒ UP/Down - changes to the other interval.
‚ Press M to confirm your selection.
ATTENTION: It is not possible to switch the recording interval during a
recording.