Westinghouse SK-32H590D - Manual (Page 23)

22
3.CHANGING CHANNELS
You can select channels using Channel Select
(0-9, • (DOT), ENT) or CH (+)/(-).
• Using Channel Select (0-9, • (DOT), ENT)
When selecting the channel using Channel Select, complete input of the channel number by holding down the
button for the last digit for a moment.
•To select a 1- or 2-digit channel number (e.g., Channel 5):
Complete the following procedure within 4 seconds.
1.Press the but ton.
2.Press the but ton. 3.Press the but ton.
•To select a 3-digit channel number (e.g. Channel 115):
Complete the following procedure within 4 seconds.
1.Press the button. 2.Press the but ton. 3.Press the but ton. 4.Press the but ton.
• To select a digit channel number (e.g. Channel 5.1):
Complete the following procedure within 4 seconds.
1.Press the but ton. 2.
Press the but ton. 3. Press the but ton. 4.Press the but ton.
• Using LAST
Press to switch the currently tuned channel to the previously tuned channel.
Press again to switch back to the currently tuned channel.
BASIC OPERATION
ENT
ENT
ENT
0 5
1 1 5
5 • 1
4.INPUT SELECTION
1.Press TV,DVD,PC,YPbPr,Video, HDMI on Remote Control directly.
2. a:Press Input on the remote control to display the Input
list.
b:Press ▲/▼ to select the desired source.
c:Press ENTER to switch the input source.
Input
Last