Whirlpool CMT061SG - Manual (Page 15)

15
4. Start the oven.
At end of cooking time:
Four tones will sound and the display will
show “End”.
To see the cook power during
cooking:
NOTE: If you wish to change the cook
power press the desired Number pad.
The power level will be displayed “P-5”.
Cooking with more
than one cook cycle
For best results, some recipes call for one
cook power for a certain length of time, and
another cook power for another length of time.
Your oven can be set to change from one to
another automatically, for up to 4 cycles.
NOTE: Refer to a reliable cookbook for
cooking times and power levels.
1. Put the food in the oven and
close the door.
2. Set the cooking time for the
first cycle.
(example for 50%
cook power)
1. Put the food in the oven and
close the door.
2. Set the cooking time.
(Example for 7 minutes, 30 seconds:)
3. Set the cook power.
(Example for 50% cook power:)
NOTES:
• You cannot enter a cook power higher
than 10. If you touch a number from 2
to 9 after you touch Number pad 1, the
cook power will become the second
number you touched. For example, if
you touch Number pads 1 and 4 the
cook power would be “4.”
TOUCH
7
TOUCH
COOK
TIME
3
TIMER
0
TOUCH
COOK
POWER
TOUCH
5
TOUCH
START
ENTER
(cooking time
counts down)
TOUCH
COOK
POWER
TOUCH
COOK
TIME
U S I N G Y O U R M I C R O W A V E O V E N
4393786v05(c70) 4/28/98, 5:11 PM 15