Whirlpool CMT061SG - Manual (Page 12)

12
Setting the clock
When your microwave oven is first plugged
in, or after a power failure, the display will
show “ : ”. If a time of day is not set, “ : ” will
stay on the display until you set the clock or
another function.
NOTES:
• You can only set the clock when the oven
is not in use.
• If you enter an incorrect time, three tones
will sound, “Err,” then “0” will appear on the
display. Re-enter the correct time.
• If you touch OFF/CANCEL while setting
the clock, the clock will return to the time
already on the display.
To set time:
1. Choose the setting.
2. Enter the time of day.
Example for 5:30:
3. Touch CLOCK/SET or
START/ENTER.
OR
START
ENTER
G E T T I N G T O K N O W Y O U R M I C R O W A V E O V E N
CLOCK
SET
TOUCH
TOUCH
5 3
TIMER
0
TOUCH
CLOCK
SET
Using the minute
timer
Your microwave oven can be used as a
kitchen timer. Use the minute timer for
timing up to 99 minutes, 99 seconds.
1. Touch “0.”
2. Enter the time to be
counted down.
3. Start the countdown.
At the end of timer countdown four tones
will sound and the display will show
“End”.
TOUCH
TIMER
0
TOUCH
3
TIMER
0
TIMER
0
(example: 3 minutes)
TOUCH
START
ENTER
NOTE: The minute timer can be used to set
a delayed start time by following Steps 1
and 2 below, then set cook time as de-
scribed in the “Cooking with more than one
cook cycle” section.
4393786v04(c70) 4/28/98, 4:18 PM 12