weber Genesis Silver-C - Manual (Page 21)

C-3
Install side burner
You will need: side burner,
ƽ
WARNING: Make sure gas supply is off.
Start the side burner hose into the opening between
the control panel and right trim piece.
Tilt the side burner slightly, toward the control panel.
Latch the side burner locking clip on the left, under the
control panel.
Set the side burner in place in the frame. The side
burner locking clip on the right should latch under the
right trim piece.
Route the hose between the cylinder panel and wheel
frame.
Push side burner control knob onto the valve.