Assembly – Weslo E 20 User Manual

Page 5

ASSEMBLY

Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the
packing materials until assembly is completed.

Assembly requires the included tools and your own adjustable wrench and Phillips
screwdriver

PART CHART

Use the drawings below to identify the small parts used in assembly. The number in parenthesis below
each drawing refers to the key number of the part, from the PART LIST on page 14; the second number refers to
the quantity needed for assembly. Note: Some small parts may have been pre-attached for shipping. If a
part is not in the parts bag, check to see if it has been pre-assembled.

M8 Flat

Washer (51)–8

M10 x 70mm Carriage Bolt (27)–2

M4 x 16mm

Screw (43)–4

M10 x 97mm Hex Head Bolt (12)–2

M8 x 66mm Carriage Bolt (52)–4

M8 x 54mm Carriage Bolt (11)–4

M10 Nylon

Locknut (26)–4

M8 Nylon

Locknut (55)–8

M6 x 16mm

Screw (46)–8

M10 x 25mm Button

Head Screw (53)–5

M10 Split

Washer (54)–5