Warwick X7220 User Manual
Page 11
Address Mode
Not used
TX Address
Not used
RX Address
Not used
Restore Defaults
Set Factory Defaults.
Exit without Save Return to Modem
Advanced Menu
Return to Main Menu
Display Main Menu by pressing the left Arrow Key
Enable AT Instructions
Not used
TX
Priority
Not
used
Mode of Operation
Selects one of the following:
Modem 1 in continuous use,
Modem
2
in
continuous
use
Modem 1 and Modem 2 cycling on the set Duty Cycle
Duty Cycle
Selects the time in hours for each modem to be operational. (1 to 48 Hr)
Packetise Data
Not used
Number of Retries
Not used
Enable Remote Access
Not used
Alarm code
One of the following alarm codes are displayed:
No
fault
00
Bit error rate high 1
11
PSU
fail
1
12
RF power fail 1
14
Bit error rate high 2
21
PSU
fail
2
26
RF power fail 2
24
Dual RF power fail
75
Dual
PSU
73
Engage Rpt Path
Not used.
Set Repeater Path
Not used