Worksaver HK-102 - Manual (Page 2)

REF. PART NO.
NO. NO. DESCRIPTION REQ.
1 865104 Main Frame Weldment (HK-102) 1
2 2504049 Drive Zerk 5 / 16 ” 1
3 2503002 Bolt 3 / 4 ” – 10 NC x 2” Hex Head 2
4 590072 Top Link, Cat. I (AK-500F) 1
5 590002 Toplink Pin Cat. I (AK-9) 1
6 590006 Linch Pin 7 / 16 ” (AK-14) 9
7 865120 LH Pull Bracket 1
NS 865125 RH Pull Bracket 1
8 2503048 Bolt 5 / 8 ” – 11NC x 2” Hex Head 2
9 2502007 Washer 5 / 8 ” Springlock 2
10 2501005 Washer 5 / 8 ” Flat 6
11 865338 Pin, Pull 7 / 8 ” Dia. x 7 3 / 4 ” Lg. 2
12 865339 Spacer, Pull Pin 2
13 590014 Hairclip Pin 5 / 16 ” (AK-36) 2
14 865014 Lift Arm Weldment 34” 2
15 861148 Lift Control Arm Weldment 2
590317 Stabilizer Assembly (Parts 16-19) 2
16 590406 Barrel 7 / 8 ” – 14NF 2
17 590407 Stabilizer End RH 2
18 590318 Stabilizer End LH 2
19 2500018 Nut 7 / 8 ” – 14NF Jam Hex 2
861131 Leveling Assembly (AK-503) (Parts 20-24) 2
20 590278 Barrel 1 1 / 8 ” – 7NC x 8 1 / 4 ” Lg. 2
21 590145 Knock-In Handle 2
22 861136 Lower Lift Bracket RH 2
23 861139 Upper Lift Bracket LH 2
24 2500024 Nut 1 1 / 8 ” – 7NC Jam Hex 2
25 590001 Toplink Pin Cat. I (AK-8) 2
26 860107 Upper Lift Pin ( 7 / 8 ” Dia. x 3 1 / 2 ”) 2
27 590069 Stabilizer Stub Pin (AK-378) with Washer & Nut 2
28 2503059 Bolt 5 / 8 ” – 11NC x 2 1 / 4 ” Hex Head 2
29 2500041 Nut 5 / 8 ” – 11NC Hex Nylock 2
30 101039 Safety Sign – Caution (Stay Clear of Arms) 2
31 101082 Safety Sign – Warning (Pull from Drawbar) 1
1 10
To the Owner/Operator/Dealer
All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded opera-
tor who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this
implement to be used with all its safety equipment properly attached to minimize the chance of accidents.
BEFORE YOU START!!
Read the safety messages on the implement and shown in your manual.
Observe the rules of safety and common sense!
THIS SAFETY ALERT SYMBOL IDENTIFIES IMPORTANT
SAFETY WARNING MESSAGES. CAREFULLY READ EACH
WARNING MESSAGE THAT FOLLOWS. FAILURE TO
UNDERSTAND AND OBEY A SAFETY WARNING, OR
RECOGNIZE A SAFETY HAZARD, COULD RESULT IN AN
INJURY OR DEATH TO YOU OR OTHERS AROUND YOU.
THE OPERATOR IS ULTIMATELY RESPONSIBLE FOR THE
SAFETY OF HIMSELF, AS WELL AS OTHERS, IN THE
OPERATING AREA OF THE TRACTOR AND EQUIPMENT.
UNDERSTAND SIGNAL WORDS
Note the use of the signal words DANGER, WARNING
and CAUTION with the safety messages. The
appropriate signal word for each has been selected
using the following guidelines:
DANGER: Indicates an imminently hazardous situation
that, if not avoided, will result in death or serious injury.
This signal word is to be limited to the most extreme
situations typically for machine components which, for
functional purposes, cannot be guarded.
WARNING: Indicates a potentially hazardous sit-
uation that, if not avoided, could result in death
or serious injury, and includes hazards that are
exposed when guards are removed. It may also
be used to alert against unsafe practices.
CAUTION: Indicates a potentially hazardous sit-
uation that, if not avoided, may result in minor or
moderate injury. It may also be used to alert
against unsafe practices.
THIS SYMBOL MEANS
– ATTENTION!
– BECOME ALERT!
– YOUR SAFETY IS INVOLVED!
I M P O RTA N T S A F E T Y I N F O R M ATION!
Working with unfamiliar equipment can lead to careless injuries. Read this manual, and the manual for your tractor,
before assembly or operating, to acquaint yourself with the machine. It is the equipment owner’s responsibility, if this
equipment is used by any person other than yourself, is loaned or rented, to make certain that the operator, prior to
operating:
1. Reads and understands the operator’s manuals.
2. Is instructed in safe and proper use.
The use of this equipment is subject to certain hazards which cannot be protected against by mechanical
means or product design. All operators of this equipment must read and understand this entire manual, paying
particular attention to safety and operating instructions, prior to using. If there is something in this manual you
do not understand, ask your supervisor, or your dealer, to explain it to you.
Most accidents occur because of neglect or carelessness. Keep all helpers and bystanders twenty-five feet (25’)
from operating equipment. Only properly trained people should operate this tractor and attached implement. It
is recommended the tractor be equipped with a Roll-Over Protection System (ROPS) and a seat belt that is used.
Always stop the tractor, set brake, shut off the tractor engine, remove the tractor key, and lower implement to the
ground before dismounting tractor. Never leave equipment unattended with the tractor running.
H K - 1 0 2
3 PT. ADAPTER KIT
R E PAIR PA RT S
Obey All
Safety Warnings