Wind Crest WPN - Manual (Page 4)

DUCT COVER INSTALLATION INSTRUCTION FOR WPN MODELS
PLEASE READ DUCT COVER AND HOOD INSTRUCTION
COMPLETELY BEFORE PROCEEDING WITH INSTALLATION
PARTS: One 15” Duct Cover Section
One 19” Duct Cover Section
One Duct Cover Bracket
Two #8 x 1-
1/2” Screws (Mount duct cover bracket to ceiling)
Four #8 x 3-
1/2” Screws Secure duct cover section 1 and 2)
Four #8 x 1/2“ Screw Mount duct cover to hood)
Your WPN model hood includes a duct cover, which can be used as an alternate installation method to enclose the
ventilation duct. The hood can also be mounted under a cabinet.
HOOD UNDER CABINET
INSTALLATION INSTALLATION
HOOD WITH DUCT COVER
Two typical installation options shown above
When used, the duct cover is designed to accommodate typical ceiling heights of 8-ft to 10-ft.
USING DUCT COVER
SECTION - 1 & 2 ONLY SECTION - 2 ONLY
USING DUCT COVER USING DUCT COVER
SECTION - 1 ONLY
15"
15"
19"
32" MAX
19" MIN
CEILING
CEILING
CEILING
CAUTION: To prevent damaging the duct cover, DO NOT remove the protective covering until you are
ready to assemble the cover to the hood.